12X24X3 factory DISPLAY CASE

12" x 24" x 3" Display Case (outside measurements)

10.5" x 22.5" x 2" inside measuremens. ( viewing area of the glass )

Locking with 2 keys

Normal color will be Varathane Special Walnut stain, with shiny brass hardware fastened with brass screws.
I also have nickel plated hardware with stainless screws

I spray 3 coats of Clear Satin Polyurethane, lightly sanded between coats for a beautiful protective finish.

Your choice of 6 different background colors. Green, Red, Black, Tan, Gray or Dark Blue.

All my display cases are built from solid wood. NOT plywood or pressed particle board.
I try to build the entire case from the same board so the grain will match all the way around.
They're glued and hardwood dowelled and reinforced with the decorative metal corners.

Real glass front, NOT plastic, or plexiglass

This case will have 2" of foam and the felt cover. There will be 1 layer of 1" foam, one layer of 1/2" foam, ( this will allow more room between the foam and the glass for thicker items) also some filler pieces of 1/2" foam to fill the factory case to the glass. By adding or removing some of the foam you can adjust the thickness of the interior for your display items.

I've been building these cases in various sizes for over 35 years. You can be confident you are getting a beautiful quality product you will be proud to hang on your wall or give as a gift.

I can build these cases almost any size or color you need.